When using a thermal oil bitumen tank, it should be noted that the longer the bitumen is stored in the thermal oil bitumen tank, the more sediment will be produced by oxidation, and the more serious the impact will be on the quality of the bitumen. Therefore, when using a thermal oil asphalt tank, you must check the bottom of the tank once a year to determine whether the thermal oil asphalt tank needs cleaning. After half a year of use, you can test it. Once it is found that the antioxidants are reduced or there are impurities in the oil, you must add anti-oxidants in time, add liquid nitrogen to the expansion tank, or perform fine filtration of the thermal oil heating equipment. Hope that the majority of construction users Even if you know how to use it, you also need to know how to maintain the thermal oil bitumen tanks.

Modified asphalt equipment uses modified asphalt colloid mill. Its blade has high hardness, high linear speed of the moving disk, and the gap can be adjusted to 0.15mm. It is suitable for processing various polymer-modified asphalts, such as SBS, PE, EVA, etc.

How much do you know about the related applications of emulsified asphalt equipment? As a manufacturer specializing in the production of asphalt equipment, what is the production process of our emulsified asphalt equipment? Next, our staff will give you a brief explanation.

After the bitumen decanter plant is installed, you need to check whether its interfaces are firm and precise, whether the operating components are mobile, whether the piping system is smooth, and whether the power supply wiring design is It is not necessary. When loading the bitumen decanter plant equipment, please open the automatic exhaust valve so that the bitumen decanter plant can smoothly develop and enter an electric heater. During operation, please observe the water level carefully and adjust the valve so that the water level is always connected to the appropriate adjustment position.

Check the quality and uniformity of various materials from the material pile and conveyor at any time, check the mud and fine-grained gravel, and check whether there is a leak in the cold silo. Check whether the mixture is evenly mixed and there is no leakage. There is no speckling material, whether the whetstone ratio is valid, and check the concrete segregation of aggregates and mixtures.

How much do you know about modified asphalt equipments? Next, our staff will briefly introduce the relevant knowledge points to you, so that more people can understand it.